The HoMedics UHE-WM350 is an ultrasonic cool mist humidifier designed to enhance indoor air quality and comfort. It utilizes ultrasonic technology to create a fine mist that helps maintain optimal humidity levels in your living space.
The complete manual for Homedics UHE-WM350 is displayed below.
Table of Contents
Homedics UHE-WM350 Manual PDF
Homedics UHE-WM350 Specification
- Type: Ultrasonic Cool Mist Humidifier
- Dimensions: Approximately 10.2 x 10.2 x 12.5 inches
- Weight: About 5 lbs
- Tank Capacity: 1.2 gallons (4.5 liters)
- Run Time: Up to 48 hours on low setting (varies with usage and environmental conditions)
- Coverage Area: Suitable for rooms up to 350 square feet
- Power Consumption: Around 30 watts
- Noise Level: Operates quietly (typically under 30 dB)
Product Features
- Ultrasonic Technology: Produces a fine mist using high-frequency vibrations, making it very quiet.
- Adjustable Mist Control: Allows you to set the mist intensity to your preference.
- Cool Mist: Adds moisture to the air without heating it, which is ideal for comfort and health.
- Automatic Shutoff: Turns off the humidifier when the water level is low or the tank is removed.
- Easy-to-Fill Tank: Features a wide opening for straightforward filling and cleaning.
- Filter-Free: Does not require a filter, reducing maintenance and cost.
- Night Light: Includes a soft night light for added convenience in dark rooms.
- Variable Mist Settings: Provides multiple mist output levels to suit different needs.
- Translucent Tank: Allows easy monitoring of water levels.
Find the products here.
Also Read : Homedics UHE-CM18 Manual PDF
Frequently Asked Questions (FAQs)
How long does the HoMedics humidifier last?
Typical Lifespan: With proper care, a HoMedics humidifier can last anywhere from 2 to 5 years.
Usage: Regular use, especially if the unit runs continuously, may shorten its lifespan.
Maintenance: Regular cleaning and replacing parts as needed (like filters, if applicable) can help extend its longevity.
Model-Specific Factors: Some models may have different durability expectations based on their design and components.
How do you reset the clean on a HoMedics humidifier?
Turn Off & Unplug: Ensure the humidifier is turned off and unplugged from the power source.
Clean the Humidifier: Thoroughly clean the water tank and other removable parts according to the manufacturer’s instructions. This usually involves using a mild detergent or vinegar solution.
Reassemble the Humidifier: Once all parts are clean and dry, reassemble the humidifier.
Plug In & Power On: Plug the humidifier back in and turn it on.
Reset the Indicator:
Press & Hold: Locate the “Clean” or “Cleaning Reminder” button. Press and hold it for about 3-5 seconds until the indicator light turns off or resets.
Verify: Ensure the cleaning indicator is no longer lit.
Can I put vinegar in my HoMedics humidifier?
Turn Off & Unplug: Ensure the humidifier is turned off and unplugged from the power source.
Prepare Solution: Mix equal parts of water and white vinegar. This solution helps to dissolve mineral deposits and disinfect the tank.
Clean the Tank:
For the Water Tank: Fill the tank with the vinegar solution, swish it around, and let it sit for about 15-30 minutes. Use a soft brush or cloth to scrub any visible deposits.
For Other Parts: If the humidifier has removable parts that need cleaning, you can also soak them in the vinegar solution.
Rinse Thoroughly: After cleaning, rinse all parts thoroughly with clean water to remove any vinegar residue.
Dry Completely: Allow all parts to air dry completely before reassembling the humidifier.
How do you clean a HoMedics transducer?
Turn Off & Unplug: Ensure the humidifier is turned off and unplugged from the power source.
Disassemble the Unit: Remove the water tank and any other detachable parts to access the transducer.
Locate the Transducer: The transducer is typically located at the bottom of the water tank or the base of the humidifier. It may look like a small, flat, or circular component.
Clean the Transducer:
Prepare a Cleaning Solution: Mix equal parts of water and white vinegar.
Soak a Cloth or Cotton Swab: Dip a cloth or cotton swab in the vinegar solution. Gently clean the surface of the transducer. Avoid using abrasive materials that could damage it.
Wipe Gently: Carefully wipe the transducer to remove any mineral deposits or residue.
Rinse the Area: Use a clean, damp cloth to wipe away any vinegar residue from the transducer and surrounding area.
Dry Thoroughly: Let the transducer and other parts dry completely before reassembling the humidifier.
Reassemble & Refill: Put the humidifier back together, refill the tank with clean water, and plug it back in.
Is it safe to leave humidifier on all the time?
Maintain Proper Humidity Levels: Ensure the room’s humidity stays between 30% and 50%. Excessive humidity can lead to mold growth and dust mites, while too little humidity can cause dryness.
Regular Maintenance: Clean the humidifier regularly to prevent mold, bacteria, and mineral buildup. Follow the manufacturer’s cleaning recommendations.
Check Water Levels: Ensure the water tank is always filled, and check for any signs of leaks or malfunctions.
Monitor for Issues: Watch for any unusual noises, odors, or changes in performance that might indicate a problem with the humidifier.
Use a Hygrometer: Consider using a hygrometer to monitor room humidity and avoid over-humidification.
Automatic Features: If your humidifier has an auto shutoff or humidity control feature, use these settings to maintain appropriate humidity levels and prevent continuous running.
Is it OK to use humidifier 24 hours?
Maintain Ideal Humidity Levels: Keep indoor humidity between 30% and 50% to avoid issues like mold growth and dust mites. Use a hygrometer to monitor levels.
Regular Maintenance: Clean the humidifier frequently to prevent mold, bacteria, and mineral buildup. Follow the manufacturer’s cleaning instructions.
Check Water Levels: Refill the tank regularly and ensure there are no leaks or malfunctions.
Use Automatic Features: If your humidifier has an auto shutoff or humidity control, use these features to avoid over-humidification and conserve energy.
Monitor Performance: Watch for any unusual noises, odors, or changes in performance.
Follow Manufacturer’s Instructions: Always refer to your specific model’s manual for operating guidelines and safety precautions.